Reflective Angled Plastic Marker Adapters with 40mm Targets Red or Gray
RSAK80's are used on rails, bridges, noise barrier tunnels, dams, building, supports, high-bay shelves, glass and natural stone facades, etc. At a well-planned installation adapters that are equipped with pre-installed smart angle targets permit access to the surveying paint from almost any position.
On railway tracks, for example, the surveyor no longer needs to put himself in danger but can perform his measurement from a safe position at any time. These targets can potentially eliminate dangerous and expensive road blocks that re no longer necessary, since many measurements can be simplified considerably. 3-dimensional observation are ensure by XYZ coordinates.
The targets are fitted vertically to the axis in lift shafts. The axes are clearly visible from an position for all workers.
Crosshairs are imprinted on the backing plate under the exact center of each reflective target to ensure the survey point is durably marked.
Unmistakable survey points
3-dimensional monitoring of bridges
Roads no longer need to be closed or obstacles crossed as every measuring point can be checked from a distance of up to 200m, range depends on the measurement equipment
Simple and quick measurement and monitoring of buildings, façades, supporting structures, pillars, high rack storage facilities, dams and many other objects requiring monitoring
For monitoring the formwork during concrete pouring, e.g. for bridge arches, single-faced wall formwork
For monitoring railway tracks where there is surrounding building work e.g. bridge and tunnel construction, pressure grouting of railway lines, etc.
Measurements and monitoring are possible from virtually any angle and at locations which are difficult to access
The RSMP15 adapter with a 12.7 mm mini prism is used for all the applications referred to above if measurements using a prism are desired or necessary
Temperature and UV-resistant
Crosshairs are imprinted on the backing plate under the exact centre of the reflective target to ensure the survey point is durably marked. If the reflective target is damaged at any point, it can easily be replaced and the original survey point can be restored quickly, easily and cheaply.